The vehicle no longer matches the business.
A rebrand, a more premium market or a stronger competitive position has left the existing van or fleet looking forgettable.
Brand-led vehicle graphics ↗
Make an enquiry Vehicle graphics · Architectural wraps · Cheltenham
Make the surface
impossible to ignore.
Bold commercial vehicle graphics and design-led interior films—planned around the brand, fitted around the surface and finished with the same discipline as our premium automotive work.
Vehicles · Fleets · Cabinetry · Retail · Statement surfaces
Beyond signwriting ↓A wider wrapping studio
Signwriting is only
the beginning.
If a surface can be prepared, specified and wrapped properly, it can become part of the brand.
Adept creates vehicle liveries that earn attention on the road, but the same control of material, alignment and edges also unlocks commercial interiors. We have applied specialist finishes to automotive cabinetry, transformed a lift in gold and used chrome film to turn a retail interior into an experience.
The best answer is not always louder. It may be a restrained fleet system, a flawless satin-grey cabinet run or one highly reflective focal point that gives a space its identity.
Gorilla · full commercial livery
Start with the trigger
What needs
to change?
The right solution depends on why the project exists. Start with the commercial problem, then decide how much of the vehicle or space needs to carry the idea.
Every vehicle needs to feel like one system.
New vehicles, different body shapes and changing schedules need artwork that can scale without the brand becoming inconsistent.
Fleet graphics and rollout ↗The interior feels dated—but the build is sound.
Cabinetry, fitted furniture, doors or wall panels need a new finish without the cost, waste and disruption of stripping everything out.
Architectural surface wrapping ↗One surface needs to become the talking point.
A lift, counter, feature wall or retail installation needs a finish conventional paint and joinery cannot deliver with the same impact.
Statement metallic and chrome films ↗
Design direction · Vehicle graphicsBuilt around every panel break
Built around the bodywork
Not a logo on a van.
A moving brand asset.
Good vehicle graphics should make the business recognisable before the phone number is close enough to read.
We design and install cut lettering, partial wraps and full printed liveries around the actual vehicle—not a generic rectangle. Panel breaks, sliding doors, handles, contours and rear visibility all influence how the identity moves around the body.
- 01One-off commercial vehicles and premium support vans
- 02Fleet systems adapted across multiple body styles
- 03Printed graphics, colour changes and cut vinyl combined
- 04Design development, proofing, production and fitting
Architectural surface wraps
Change the finish.
Keep the structure.
Where cabinetry, doors, counters or wall panels are fundamentally sound, architectural film can create a precise new material language without a complete strip-out.
Quietly transformational.
Matte, satin and tactile films can reset fitted furniture, reception cabinetry, doors and storage runs with consistent colour and crisp architectural lines.
Finish reference · substrate survey required
One surface. Maximum memory.
Brushed metals can turn a functional lift or doorway into the visual anchor of an arrival space.
Finish reference · exact colour by sample
Chrome that changes the whole room.
Reflective films, display joinery and campaign surfaces for shops, hospitality and statement interiors.
Finish reference · project-specific specificationImportant: architectural films depend on a stable, smooth and suitably prepared substrate. We inspect first, specify honestly and will not wrap a surface that cannot support the finish.
The visual benchmark
Read at 50 mph.
Respected at 50 cm.
The best liveries work twice: a strong shape and colour system earns recognition at distance, then precise registration, clean edges and material control reward a closer look.
Make the silhouette unmistakable.
Ownable colour, scale and movement should identify the business before anyone has read a line of copy.
Every break has to land.
Door seams, handles and wheel arches are part of the design—not interruptions to work around at the end.
Concept photography sets the creative standard. Final artwork is developed around your brand, vehicle geometry and commercial objective.
Specified for the job
The finish is only as good as what sits beneath it.
Vehicle films
Cast print vinyl, protective laminates and cut films selected for exterior contours, weather and expected service life.
Architectural films
Interior-grade finishes designed for stable joinery and commercial surfaces—not repurposed vehicle wrap.
Preparation
Adhesive residue, unstable paint, silicone, damage and rough surfaces can compromise a finish and must be resolved first.
Proof & sample
Colour, sheen, scale and important sightlines are agreed before material is produced or installation begins.
From idea to installation
Creative enough
to be noticed.
Controlled enough
to be repeatable.
A bold result still needs a disciplined commercial process. Decisions are locked before production so design ambition, installation reality and deadline stay aligned.
Define
We establish the audience, environment, surfaces, deadline and what the finished project needs to achieve.
Survey
Vehicles or architectural substrates are measured and inspected so the material and installation plan are realistic.
Design
Artwork, finish samples and visual proofs are refined around the actual panel shapes, gaps, joins and sightlines.
Produce
Graphics are colour-managed, printed, laminated or cut using a material specified for the application.
Install
Surfaces are prepared and fitted methodically, with alignment, edge finish and disruption carefully controlled.
Before you brief the project
Useful answers.
Before materials are ordered.
Send photographs, dimensions, vehicle details, brand files and any launch or reopening date. We can then tell you what needs a survey and what can be scoped immediately.
Do you design vehicle graphics as well as install them?+
Yes. We can develop the visual direction from an existing brand identity, adapt supplied artwork or work with your appointed designer. Every concept is proofed against the actual vehicle before production.
Can you signwrite a single van and then roll the design across a fleet?+
Yes. We can build a master graphics system and adapt it across different vehicle models while preserving hierarchy, colour and brand recognition. Installation can then be scheduled around vehicle availability.
What can be wrapped inside a commercial interior?+
Suitable smooth, stable surfaces can include fitted cabinetry, reception desks, lift doors and reveals, wall panels, internal doors, display units and selected furniture. Every substrate must be inspected before we confirm suitability.
Can architectural wrap replace a full refurbishment?+
Where the underlying build is sound, architectural film can change colour, texture and finish with far less removal, waste and downtime than replacement. It will not repair unstable, damp or badly damaged substrates.
Can you install chrome, brushed-metal and other specialist films?+
Yes, subject to surface shape and material suitability. Mirror chrome, brushed metals and highly reflective finishes demand especially careful preparation because they reveal imperfections and alignment errors.
How much do vehicle graphics or interior wraps cost?+
Pricing depends on design time, surface area, coverage, material, print and laminate requirements, substrate preparation and installation complexity. Send photographs, dimensions or vehicle details for an initial scope; the final quotation follows survey and artwork approval.
How long will the work take?+
Simple vehicle lettering may be completed quickly, while a full printed livery, fleet rollout or architectural installation takes longer. We agree the programme before production and plan commercial work to minimise operational disruption.
Vehicle or space. Start with the brief.
Bring us the surface.
We'll find the statement.
Tell us what needs to change, who needs to notice and when it needs to be ready. For interiors, include photographs and approximate dimensions; for vehicles, include the make, model and quantity.